By Alabama Oral and Maxillofacial Surgery
February 14, 2018
Category: Dental Procedures
WemayNeedtoRemoveoneorMoreTeethBeforeApplyingBraces

“To gain something, sometimes you have to give up something else.”

No, that isn't the latest viral meme on the Internet. It's actually a practical consideration that could arise in orthodontics.

In this case, the “something” to gain is a straighter, more attractive smile; the “something” you may have to part with is a few teeth. This may be necessary if there are too many teeth on a dental arch for its capacity, a situation called crowding. A lack of space is the main reason teeth come in misaligned.

Before we can correct this, we'll need to free up space to allow for tooth movement by removing one or more of the existing teeth. The ideal candidates are those that are near to the teeth we wish to move but not highly visible. The first bicuspids are the most frequent choices for removal: they're located behind the cuspids or eyeteeth (the pointed teeth right under the eyes).

Ideally, we'll remove the target teeth some time before we apply braces to give the gums a chance to heal. At the same time we want to preserve the bone that once supported the teeth we've extracted. This is because when we chew the forces generated by the teeth stimulates bone replacement growth. When a tooth is no longer there the supporting bone doesn't receive this stimulation and may ultimately reduce in volume.

We may try to prevent this by placing a bone graft in the empty socket immediately after removing the tooth. The graft serves as a scaffold to encourage new bone to grow. Hopefully when we're ready to apply braces, the bone will be strong and healthy to handle the movement of the teeth.

As the teeth move under the influence of braces, they'll begin to fill up the space created by tooth removal. Once it's completed, the extracted teeth won't be missed — the other teeth now straightened will completely fill out the smile.

The different steps in this process must be carefully planned and executed precisely, and it will take months or even years to complete. In the end, though, this complicated bite problem can be corrected and replaced with an attractive, straight smile.

If you would like more information on correcting a poor bite, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Tooth Removal for Orthodontic Reasons.”

By Alabama Oral and Maxillofacial Surgery
January 30, 2018
Category: Dental Procedures
Tags: oral health   x-rays  
ConeBeamX-RayscanImproveOutcomesinManyDentalSituations

For decades, dental x-rays have helped us accurately diagnose and treat a wide array of dental diseases and conditions. But even with recent advances in digital imaging, the traditional x-ray does have one drawback: its two-dimensional view doesn’t always provide the “big picture” that a three-dimensional viewpoint can provide.

But a new type of x-ray technology can do just that: known as cone beam computed tomography (CBCT), these machines record hundreds of digital images as a cone-shaped beam of x-ray energy is projected through a device that rotates around a person’s head. A computer then assembles the images into a single three-dimensional image that can be manipulated on screen to view from various angles. Not only does this provide greater context and detail, it does so with no more radiation exposure than a standard 20-film digital full-mouth x-ray series.

While CBCT hasn’t replaced the traditional x-ray, it’s making its mark in a number of specialized areas of dentistry. The following are just a few of the ways CBCT is improving both accuracy and treatment outcomes.

Orthodontics. CBCT can provide a much more detailed view of the entire jaw; this can help us determine the best locations for realigning teeth safely and effectively.

Dental Implants. With a CBCT scan we can precisely locate nerve canals, sinuses and adjacent teeth before implant surgery to locate the best position for the implant.

TMD Treatment. To help develop the best treatment approach for alleviating the pain and dysfunction of temporo-mandibular joint disease (TMD), a CBCT scan can provide us detailed information on how the disease is affecting a patient’s joints, teeth, sinuses and airway.

Impactions. An impacted tooth can exert damaging pressure against the roots of neighboring teeth. A CBCT scan allows us to observe the impacted tooth from various vantage points to determine the best treatment approach for neighboring teeth, nerve canals and sinuses.

If you would like more information on CBCT technology, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Getting the Full Picture With Cone Beam Dental Scans.”

By Alabama Oral and Maxillofacial Surgery
January 15, 2018
Category: Oral Health
LifeIsSometimesaGrindforBrookeShields

Ever since childhood, when her career as a model and actress took off, Brooke Shields has enjoyed worldwide recognition — through advertisements for designer jeans, appearances on The Muppet Show, and starring roles in big-screen films. But not long ago, that familiar face was spotted in an unusual place: wearing a nasal anesthesia mask at the dentist's office. In fact, Shields posted the photo to her own Instagram account, with the caption “More dental surgery! I grind my teeth!” And judging by the number of comments the post received, she's far from alone.

In fact, researchers estimate that around one in ten adults have dental issues that stem from teeth grinding, which is also called bruxism. (Many children also grind their teeth, but it rarely causes serious problems, and is often outgrown.) About half of the people who are teeth grinders report problems like persistent headaches, jaw tenderness and sore teeth. Bruxism may also result in excessive tooth wear, and may damage dental work like crowns and bridges; in severe cases, loosened or fractured teeth have been reported.

Researchers have been studying teeth grinding for many years; their findings seem to indicate that it has no single cause. However, there are a number of factors that play a significant role in this condition. One is the anatomy of the jaw itself, and the effect of worn or misaligned teeth on the bite. Another factor relates to changes in brain activity that occur during the sleep cycle. In fact, nocturnal (nighttime) bruxism is now classified as a sleep-related movement disorder. Still other factors, such as the use of tobacco, alcohol and drugs, and a high level of stress or anxiety, can make an individual more likely to experience bruxism.

What can be done for people whose teeth grinding is causing problems? Since this condition may have many causes, a number of different treatments are available. Successful management of bruxism often begins by striving to eliminate the factors that may cause problems — for example, making lifestyle changes to improve your health, creating a soothing nighttime environment, and trying stress-reduction techniques; these may include anything from warm baths and soft music at bedtime, to meditation and mindfulness exercises.

Several dental treatments are also available, including a custom-made occlusal guard (night guard) that can keep your teeth from being damaged by grinding. In some cases, a bite adjustment may also be recommended: In this procedure, a small amount of enamel is removed from a tooth to change the way it contacts the opposite tooth, thereby lessening the biting force on it. More invasive techniques (such as surgery) are rarely needed.

A little tooth grinding once in a while can be a normal response to stress; in fact, becoming aware of the condition is often the first step to controlling it. But if you begin to notice issues that could stem from bruxism — or if the loud grinding sounds cause problems for your sleeping partner — it may be time to contact us or schedule an appointment. You can read more about bruxism in the Dear Doctor magazine article “Stress and Tooth Habits.”

By Alabama Oral and Maxillofacial Surgery
January 07, 2018
Category: Dental Procedures
Tags: tooth extraction   braces  
ExtractingCertainTeethcanBoostOrthodonticEffectiveness

We treat most malocclusions (bad bites) with braces or clear aligners. But not all malocclusions are alike — some can require extra procedures to achieve successful results.

One such example is when incoming teeth crowd other teeth and cause them to erupt abnormally. The crowding also reduces the space needed to move the misaligned teeth to better positions. To make more room we'll often remove some of the teeth before undertaking orthodontics.

The key is to extract the right teeth. The best candidates are those whose absence will have minimal effect on both appearance and dental function. That's commonly the bicuspids, located right on the edge of the “smile zone” (the teeth most visible when we smile) between the cuspid (eye) teeth and the back molars.

Once we choose and remove the teeth our next concern is to protect the bone at the extraction site. The bone in our jaws benefits from the pressure created when we bite or chew. This stimulates new bone cells to form and replace older cells. Without it, as when we have a missing tooth, the amount of bone can diminish over time and affect the success of any future orthodontics.

To prevent this, we take care not to damage the gums and bone removing the tooth. We may also install a graft under the empty socket to encourage bone growth.

If we've removed teeth outside the smile zone, the resulting orthodontics will move teeth into the opened space. In the end, you won't even notice they're gone. Teeth lost or congenitally missing in the smile zone, though, may eventually require a replacement tooth. A dental implant is the best choice, but it should be put on hold for a younger person until their jaw has fully developed.

In the meantime, we can install a spacer or a temporary restoration to hold the empty space and prevent other teeth from drifting into it. This can be incorporated into braces or aligners, or with a removable partial denture or a temporary modified bridge.

Extracting teeth to aid orthodontics first requires a well-laid plan that could encompass several years. The end result, though, can be well worth the time and effort — better function and a new, attractive smile.

If you would like more information on the process of straightening teeth, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Tooth Removal for Orthodontic Reasons.”

By Alabama Oral and Maxillofacial Surgery
December 23, 2017
Category: Oral Health
Tags: sleep apnea   snoring  
CustomOralAppliancesCouldHelpStopSleepApnea

For millions of Americans, sleep apnea is a serious health condition. Not only can it impair your day-to-day living, you might be more susceptible to high blood pressure, heart disease or stroke.

Sleep apnea occurs when you stop breathing for short periods while asleep. When blood oxygen drops too low, your body automatically wakes you to take a breath. This can disrupt your sleep several times a night. Chronic symptoms like drowsiness, irritability or headaches during the day, or indications you're a loud snorer, are all possible signs of sleep apnea.

Fortunately, we can treat sleep apnea. One way is continuous airway pressure therapy (CPAP), a pump device that supplies pressurized air through a mask to keep the airway open during sleep. Although CPAP is effective, some people find it uncomfortable to use.

There's a more comfortable option for sleep apnea caused by mouth structures like the tongue or tonsils obstructing the airway. It involves a custom-fitted oral appliance worn while you sleep that moves these structures out of the way.

Such appliances come in two basic types. One type fits over the upper and lower teeth and uses tiny metal hinges to move the lower jaw and tongue forward away from the airway. The other fits around and presses the tongue down like a tongue depressor to move it forward.

Before starting treatment, we need to first find out if you actually have sleep apnea and what's causing it (some cases may be more acute and require advanced treatments like jaw surgery). We'll need to perform medical and oral exams and take a history, and we'll likely refer you to a sleep medicine specialist for further testing.

If you have obstructive sleep apnea, a custom-fitted appliance could be a good solution. We'll create and adjust it according to your particular mouth and jaw contours for maximum comfort. Besides the appliance, you might also lose excess weight, adjust your sleep position, seek treatment for allergies, and quit smoking. All these could help reduce sleep apnea.

In any event, your first step is to find out if you have sleep apnea. From there we'll help you find the right treatment to improve your overall health and well being.

If you would like more information on treatments for sleep apnea, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Sleep Disorders & Dentistry.”





This website includes materials that are protected by copyright, or other proprietary rights. Transmission or reproduction of protected items beyond that allowed by fair use, as defined in the copyright laws, requires the written permission of the copyright owners.